ANGLE BEAD
Helps form a true straight arris.
-
Designed to prevent chipping and cracking to vulnerable corners.
-
45mm wing provides an exceptional key for most types of plaster.
-
Use with 2 coat plaster application.
-
13mm plaster depth.
THIN COAT BEAD
-
Designed for use with one coat plaster application onto plasterboard and close-textured backgrounds.
-
Scalloped edge offers a superior key for thin coat plasterwork.
-
Suitable for a 3mm plaster finish providing reinforcement and protection where most needed.
-
22mm wing.
MINI MESH BEAD
-
Designed for use with one coat plasterwork down to a 3mm finish.
-
Fine mesh wings to provide an excellent plastering key.
-
Ideal for use on plasterboard and close-textured backgrounds.
-
25mm wing.
MATERIAL:
0.45mm stainless steel to BS EN 10088/2 Grade 1.4301.
0.45mm pre-galvanised steel to BS EN 10327:2004 DX51D+Z275.
INSTALLATION:
Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work. Alignment of butt joints may be assisted by the application of headless nails or wire of similar material within the nosing, and fixing to metal lathing may also be made with wire of similar material. Beads may be cut to size as required by using a hacksaw and snips.
Beads should be stored off the ground and in dry conditions during site work.
