A time saving solution to the tying-in of new walls to existing masonry walls/columns
BBA Approved for up to 8m, 3 storey work.
Accommodates 10mm of vertical movement.
Adjustable anchor ties to accommodate variation in brick courses.
All fixings and ties provided within the packs.
FURFIX DOUBLE FLANGE PROFILES:
Double flange profiles provide the benefit of a channel within which to build the new wall, giving substantial support to finished walls where the inside and outside faces are to be plastered/rendered.
FURFIX SINGLE FLANGE PROFILES:
A single flange return provides an edge that, once plumbed, can be used for a construction guide as well as giving support for walls to be fair faced on one side.
FURFIX NO FLANGE PROFILES:
The multi-purpose no flange profile is designed for brick/block widths of 60 to 250mm and greater, being ideal for internal and external applications where both sides of the new wall are to be fair faced.
Stainless Steel Profiles: 0.7mm stainless steel to BS EN 10088/2 Grade 1.4301.FINISH: Stainless steel or pre-galvanised mild steel with epoxy coated powder finish.
Mild Steel Profiles: 0.8mm pre-galvanised mild steel to BS EN 10327:2004 DX51D+Z275.
Coach Screws: M6 x 50mm stainless steel or delta coated mild steel.
Masonry Plugs: High density polythene.
Use all specified fasteners.
Fasteners must be spaced evenly, unless otherwise specified, and installed into the bricks or block and not into mortar joints.
Insert wall ties provided at maximum 300mm centres, bedding the ties into the mortar joints.
Detailed site work instructions are provided with each wall connector system.
In exposed locations it may be necessary to incorporate additional protection, for example
The insertion of a vertical dpc.