IN-LINE INSTALLATION:
-
Placed in continuous lengths of wall, typically at centres of 6m in blockwork and 10m in brickwork. Exact locations to be determined by designer.
-
Non-interchangeable ties ensure correct installation. Bonding ties provide a fixing to one side of the joint while sleeved ties allow for movement in the other side.
NEW WALL INTERSECTION INSTALLATION:
COLUMN FIX INSTALLATION:
-
May be fixed to existing masonry walls, concrete or steel framework.
-
Plug & screw pack and sleeved ties only used from the universal tie pack.
MATERIAL:
Stainless Steel Profiles 0.7mm stainless steel to BS EN 10088/2 Grade 1.4301
Mild Steel Profiles: 0.8mm pre-galvanised mild steel to BS EN 10327:2004 DX51D+Z275
Stainless Steel Ties: 1.5mm stainless steel to BS EN 10088/2 Grade 1.4301
Mild Steel Ties: 2.0mm mild steel to BS EN 10327:2004 DX51D+Z275 with Delta Coating.
Sleeves: 1.0mm PVC.
Coach Screws: M6 x 50mm stainless steel or galvanised.
Masonry Plugs: High density polythene.
FINISH:
Stainless steel or pre-galvanised mild steel with black epoxy coated powder finish.
HEAD RESTRAINT INSTALLATION:
OPTIONS:
Additional brick spacers are provided when expansion allowance is to be made for clay based bricks.
TO ORDER:
Select Ceejay model no. from table (see page 73) to suit material requirement (galvanised or stainless steel), masonry width, fire rating. Fixing packs to suit installation.
Example:
Galvanised Ceejay Construction joint former to suit 100mm blockwork with 2 hour fire rating. To be used as Column Fix.
Products required are as follows:
CJG100F2—Profile with 2 hour fire rating.
CJGTPAK—Universal Tie Pack.
CJGPSPAK—Fixing Pack.
To be used with brickwork, replace fire rating code with brick spacer code.
CJG100BS—Profile with brick spacer.
