Installation - Adjustable Post Base

PPRC

Installation

Fixings

On wood post:

  • LAG lag screws 10 x 80 mm.

On concrete:

  • Mechanical anchor: WA M10-78/5 pin.
  • Chemical anchor: AT-HP resin + LMAS M10-120/25 threaded rod.
Installation

ATTENTION: Post with maximum cross-section 200 x 200 mm.

INSTALLATION:

The bases are always installed in the same direction:

  • Plate 130 x 130 mm on the ground.
  • Plate 100 x 100 mm fastened on the post.

PPRC can be adjusted with a 30 mm wrench after both the plates are attached.
PPRIX requires the use of stainless steel fasteners.

  • PPRC fixed to rigid support - Adjustable Post Base
    PPRC fixed to rigid support
  • PPRC height adjusted by rotating central nut - Adjustable Post Base
    PPRC height adjusted by rotating central nut