HB

I-Joist Top Flange Hanger

HB is a joist hanger for supporting I-joists and structural composite timber from timber members.

The HB is designed especially for use with single ply headers of thicknesses 89mm or more.

Features

Features

Technical approvals : ETA-17/0554
Declarations of Performance : 
Material
  • Pre-galvanised mild steel.
Installation
  • Use all specified fasteners. Verify that the header can take the required fasteners specified in the table.
  • Web stiffeners are required for use with the HB hanger styles.
  • The HB hanger may be used for weld on applications. The minimum required weld for the top flanges is a 3.0 x 50mm fillet weld on each side of the top flange tabs.
  • Weld-on applications produce maximum allowable loads listed.
  • Uplift loads do not apply for this application.
  • Special considerations should be taken when welding galvanised steel.
Options
  • Other widths and heights are available as a special order, contact factory for details.
  • HB series hangers can be skewed and sloped to a maximum of 45°. See table for load adjustment factors.
Options
  • Other widths and heights are available as a special order, contact factory for details.
  • HB series hangers can be skewed and sloped to a maximum of 45°. See table for load adjustment factors.