TCB

Thin Coat Angle Bead

Thin Coat Bead (25mm wing, 3mm plaster depth)

  • Designed for use with one coat plaster work down to a 3mm finish.
  • Perforated wings to provide an excellent plastering key.

Installation:
Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.

Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.