Browse Other Categories

Single Flange Wall Extension Profile (1EXTS)

A single flanged quality engineered wall connector system that has been developed for use with most brick and block modules. This system has been designed for multi-purpose use where reliability and durability are important requirements. It provides lateral support to masonry wall panels in conversion, extension and new building work.

'1EXTS' Web Page > | '1EXTS' Tech Data PDF >  |

Double Flange Wall Extension Profile (1FUR)

A double flanged quality engineered wall connector system that has been developed for use with most brick and block modules. This system has been designed for multi-purpose use where reliability and durability are important requirements. It provides lateral support to masonry wall panels in conversion, extension and new building work.

'1FUR' Web Page > | '1FUR' Tech Data PDF >  |

Flangeless Wall Profile (1MPN)

A flangeless quality engineered wall connector system that has been developed for use with most brick and block modules. This system has been designed for multi-purpose use where reliability and durability are important requirements. It provides lateral support to masonry wall panels in conversion, extension and new building work.

'1MPN' Web Page > | '1MPN' Tech Data PDF >  |

Brick to Timber Stainless Steel Wall Tie (BTS)

The BTS offers an outstanding combination of performance and cost in a brick-to-timber wall tie. Manufactured from 0.5mm thick stainless steel, it exceeds the performance requirements for differential movement, compression and tension resistance.

'BTS' Web Page > | 'BTS' Tech Data PDF >  |

Crocodile Wall Extension Profile (C2K)

The UK’s most popular solution to the tying-in of new walls to existing masonry walls/columns. The C2K Crocodile Wall Starter is a quality engineered wall connector system that has been developed for use with most brick and block modules. This system has been designed for multi-purpose use where reliability and durability are important requirements. It provides lateral support to masonry wall panels in conversion, extension and new building work.

'C2K' Web Page > | 'C2K' Tech Data PDF >  |

Ceejoy Joint Formers (CJ)

Provides for longitudinal and vertical masonry movement whilst maintaining lateral stability and providing fire protection if required.

Additional brick spacers are supplied when expansion allowance is to be made for clay based bricks.

'CJ' Web Page > | 'CJ' Tech Data PDF >  |

Ceejay Crack Control Wall Starter (CJG/CJS)

PREVENT THE APPEARANCE OF MOVEMENT CRACKING IN NEW DOMESTIC CONSTRUCTIONS. Many new domestic constructions suffer from movement cracking. Drying shrinkage and settlement are the most common causes. These cracks rarely effect the structural stability of the extension but do look unsightly and give the home-owner cause for concern.

'CJG/CJS' Web Page > | 'CJG/CJS' Tech Data PDF >  |

Frame Tie (FT)

When fastening windows, door frames etc. to masonry the 1.5mm pre-galvanised Frame Tie provides enhanced mortar keying and reduces the risk of injury from sharp edges

Reinforced fixings holes and pressed channel cross section ensure rigid fixing. The 22mm width fits easily into 25mm frame grooves.

'FT' Web Page > | 'FT' Tech Data PDF >  |

Cavity Wall Tie and Retaining Clip

Improve the effective thickness of a wall under load. Maintain the moisture break and thermal/sound insulation characteristics of cavity walls. Designed, manufactured and tested to the BS requirements of DD140 parts 1 and 2.

'LWTS/IRC' Web Page > | 'LWTS/IRC' Tech Data PDF >  |

Channels and Ties (SFC/TLT)

restrains masonry panels back to the supporting structure of the building.They carries lateral load back to the frame. The ties are designed for use with masonry bed joints in bonding, sleeved debonding and cavity formats.

'SFC/TLT' Web Page > | 'SFC/TLT' Tech Data PDF >  |

Strip Wall Ties (STB/STDB)

Ties designed for use with masonry bed joints in bonding and sleeved debonding. Designed to have chamfered edges with safety in mind. The strip ties for continuous vertical joints and are available in galvanised or stainless steel.

'STB/STDB' Web Page > | 'STB/STDB' Tech Data PDF >  |

Window Board Tie (WBT)

WBT is a 3.0mm thick galavanised steel tie for attaching window boards to masonry.

The tie is 150mm long with a 21mm bend.

'WBT' Web Page > | 'WBT' Tech Data PDF >  |

Stainless Steel Wire Wall Ties (WTS)

WTS2: Type 2 General Purpose Masonry Wall Ties available in 200, 225 and 250mm lengths.

WTS4: Type 4 Light Duty Masonry Wall Ties available in 200 and 225mm lengths.

'WTS' Web Page > | 'WTS' Tech Data PDF >  |