Double and Single Sided Timber Connectors (DTSC/SSTC)
Doubel and single sided connector plates for enhanced bolt performance in timber. Conforms to BS EN 912: 1999 Aneex C. Specification for toothed plate connectors.
Refer to BS 5268:Part 2for Installation Details.
'DSTC/SSTC' Web Page > | 'DSTC/SSTC' Tech Data PDF > |
High Wind Tie (H)
Designed to provide ties for trusses and rafters likely to be subject to high winds, this versatile range may be used for general purposes, strongback attachments and as all-purpose ties where one timber crosses another.
H2.5 and H4 may be installed in pairs to achieve twice the stated safe working loads. Where the truss thickness is less than 63mm install diagonally across from each other, as shown in the
'H' Web Page > | 'H' Tech Data PDF > |
Skewable Angle (LS)
Designed to attach timber members at irregular angles, these
connectors can be bent on site from 0° to 135°.
The staggered nail pattern reduces the possibility for splitting
and allows installation on both sides of the member.
'LS' Web Page > | 'LS' Tech Data PDF > |
T Bracket (T)
'T' bracket for timber to timber connections.
'T' Web Page > | 'T' Tech Data PDF > |
Simpson Strong-Tie®, Winchester Road, Cardinal Point, Tamworth, B78 3HG. Tel: 01827 255600. Fax: 01827 255616
© 2009-2013, Simpson Strong-Tie Company Inc. All Rights Reserved
Let us know how we're doing, send us your feedback.