Technical Data - Hold Down

HTT

Technical Data

Product Dimensions

Product Dimensions - HTT - Hold Down
References Dimensions [mm] Holes flange A Holes flange B
A B C t Ø4.7 Ø5 Ø21 Ø17.5 Ø18
HTT5 404 62 64 2.8 26 - - 1 -
HTT22E 558 62 64 3 - 31 3 - 1

Product capacities - Post to Rigid support

Product capacities - Post to Rigid support - HTT - Hold Down
References Fasteners Product characteristic capacities - Timber C24 [kN] Safe WorkingLoads - Short Term - Timbr C24
Flange A Flange B R1,k (Values) R1, SWL
Qty Type Qty Type CNA4.0x40 CNA4.0x50 CNA4.0x60 CSA5.0x40 CSA5.0x50 CNA4.0x40 CNA4.0x50 CNA4.0x60 CSA5.0x40 CSA5.0x50
HTT5 14 CNA* 1 Ø16** 18.6 23.3 24.8 - - 9.3 11.7 12.4 - -
HTT22E 24 CNA or CSA* 1 Ø16** 37.5 42.3 48.4 45.5 53.9 18.8 21.2 24.2 22.8 27

*   Refer to performance table columns for type of fasteners that can be used in Flange A. Capacities vary depending on fastener type used.  Refer to ETA for performance values with alternate fastener quantities.

**  Refer to the Simpson Strong-Tie anchor product range for suitable anchors.

Typical anchor solutions are BOAXII, WA, AT-HP, SET-XP + LMAS Threaded Rod, depending on the concrete type, spacing and edge distances. The designer must check the anchor separately (Our free software Anchor Designer is available for download on our website) in accordance to the following:     F1,d / RAnchor,d ≥ 1

***  Characteristic values based upon Kmod = 0.9