Telephone: 01827 255600
Angle Bracket Cladding The ABC angle bracket has been designed to fix vertical battens directly to the supporting structure without the need for additonal battens, in the insulation/ventilation zone producing a reduction in time and cost.
'ABC' Web Page > | 'ABC' Tech Data PDF > |
Folded Mini Strap (FMS) The FMS strap provides restraint to masonry walls when the walls are supporting joist ends. They make installation easier, quicker and cheaper - without compromising on wall stability.
'FMS' Web Page > | 'FMS' Tech Data PDF > |
IC - Insulation Clip The IC Insulation clip provides a quick and simple method of retaining rigid insulation within a timber frame panel, creating a controlled gap for services. The IC saves time by allowing the insulation to be installed from the same side as the sheathing, which elminates the need to turn the panel during construction. It also fixes with a speed prong - so no nailing is required.
'IC' Web Page > | 'IC' Tech Data PDF > |
Insulated Concrete Form Hanger (ICF) The ICFLC and ICFLC-CW ledger connector system is engineered to solve the challenges of mounting steel or wood ledgers on insulated concrete walls. The system is easy, quick and versatile. the perforations in the embedded leg of the ICFLC permit the concrete to flow around it, anchoring the ICFLC securely within the block. The exposed flange provides a structural surface for mounting either a wood or steel ledger.
'ICF' Web Page > | 'ICF' Tech Data PDF > |
Concealed Flange Face Fix Hanger (IUC) The IUC is a one-piece face mounted hanger with a concealed flange. IUC can be used to fix solid sawn timber or I-joist sections. They can also be skewed by up to 5 degrees.
'IUC' Web Page > | 'IUC' Tech Data PDF > |
Face Fix Hanger for SIP Panels The IUQ/HIUQ is the first hanger range specifically designed to allow engineered joists to be face fixed to a structural insulated panel (SIP), when used in conjunction with the Simpson Strong-Tie patented SDS Screws.
'IUQ' Web Page > | 'IUQ' Tech Data PDF > |
Face Fix I-Joist Hanger (IUSE) The IUSE is a one piece, non welded face fix hanger for supporting I-Joists from timber members. This new hanger incorporates the "Strong Grip" which secures the I-Joist without the need for amy fasteners - where no uplift is required.
'IUSE' Web Page > | 'IUSE' Tech Data PDF > |
Joist End Support (JES) The JES is a two piece metal-work solution which enables the use of engineered timber I-Joists in loft conversions, offering a safe and economic alternative to the traditional method which involves steel girders.
'JES' Web Page > | 'JES' Tech Data PDF > |
Post Base (PBH) The PBH is a heavy duty elevated post base to suit various sizes of timber and glulam post. Non-standard sizes are available to order. Dowels supplied with the post base.
'PBH' Web Page > | 'PBH' Tech Data PDF > |
Stainless Steel Annular Ring Shank Nail Premium quality nails for cedar, redwood and cypress timber cladding. The slender gauge of our hand-drive stainless steel nails for timber cladding limits splitting, and textured heads ensure a better blend with wood grains
'S#SND' Web Page > | 'S#SND' Tech Data PDF > |
Stainless Steel Square Drive Bugle Head Screw #2 square drive, screw available in standard or marine grade stainless steel.
'S08' Web Page > | 'S08' Tech Data PDF > |
Annular Ring Shank for Shake and Shingle This annular ring shank is ideal for fixing shake and shingle cladding and is available in standard or marine grade stainless steel. The slender gauge of our hand-drive stainless steel nails for timber cladding limits splitting, and textured heads ensure a better blend with wood grains
'S6N' Web Page > | 'S6N' Tech Data PDF > |
Width Adjustable Face Fix Hanger (SDE) The SDE is a clever two piece face fix hanger. Because it comes in two separate sections it can be adjusted to any width from 60mm to 120mm. We supply the SDE in pairs.
'SDE' Web Page > | 'SDE' Tech Data PDF > |
Safety Fast Lite Masonry Hanger (SFLHI) The SFLHI has been designed to assist in meeting the air leakage requirements as part of the Code for Sustainable Homes.
'SFLHI' Web Page > | 'SFLHI' Tech Data PDF > |
Fy-Cem Fibre Cement for Wooden Studding Available in marine grade 316 stainless steel, this screw is suitable for fixing fibre cement board to wooden studding.
'T08C' Web Page > | 'T08C' Tech Data PDF > |
Fy-Cem Fibre Cement for Metal Studding This screw is manufactured with marine grade 410 stainless steel and features furring strips to allow the fixing of fibre cement boards to metal studs.
Loft Vent Plate (VP) The VP is part of the I-Loft system. The vent plate is a 1.2mm thick, 300mm long galvanised steel plate which provides a fast and cost effective solution to providing ventilation in the roof space.Once installed, it allows the six 20mm diameter holes to be drilled, whilst maintaining the strength of the solid sawn timber.
'VP' Web Page > | 'VP' Tech Data PDF > |
Stainless Steel Wire Wall Ties (WTS) WTS2: Type 2 General Purpose Masonry Wall Ties available in 200, 225 and 250mm lengths. WTS4: Type 4 Light Duty Masonry Wall Ties available in 200 and 225mm lengths.
'WTS' Web Page > | 'WTS' Tech Data PDF > |
Simpson Strong-Tie®, Winchester Road, Cardinal Point, Tamworth, B78 3HG. Tel: 01827 255600. Fax: 01827 255616
© 2009-2012, Simpson Strong-Tie Company Inc. All Rights Reserved
Let us know how we're doing, send us your feedback.
Simpson's Newsletter | Privacy Policy | User Agreement | Environment | Quality | Datasheets | Purchasing T&C | Sales T&∓C
