Connectors for Masonry, Timber and Steel Construction

Product lines

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

group.catalogs.label

  •  
  •  
  •  
  •  
  •  

Selections

  •  
  •  
  •  
  •  

Materials

  •  
  •  

Environment

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Others

  •  

Certifications

  •  
Loading ...
  • Herringbone Joist Strut

    HSA

    Superior alternative to unreliable, slow and costly timber struts. Meets bracing requirements for long span domestic floors.  
    View the product
  • Hold Down

    HTT

    Ideal for existing or new construction, HTT Tension ties provide a high strength timber to concrete, or timber to masonry, tension connection The long vertical leg makes it possible to add the requir...
    • CE Marking
    View the product
  • Insulation Clip

    IC

    The IC Insulation clip provides a quick and simple method of retaining rigid insulation within a timber frame panel, creating a controlled gap for services. The IC saves time by allowing the insulatio...
    View the product
  • Insulated Concrete Form Hanger

    ICF

    The ICFLC and ICFVL-CW ledger connector system is engineered to solve the challenges of mounting steel or wood ledgers on insulated concrete walls. The ledger connector system is easy, quick and versa...
    View the product
  • I-Joist Hole Support

    IHS

    The IHS is designed to strengthen I-joists when holes are required to be cut in locations not normally permitted. Allows holes to be cut 50mm from bearing point, which allows services to run close ...
    View the product
  • Insulation Retaining Clip

    IRC

    Suitable for use with cavity wall ties, the insulation retaining clip is a 75mm diameter plastic disk used to hold insulation material back to the structure,  
    View the product
  • Backer Free, Top Flange I-Joist Hanger

    ITB

    The ITB hanger eliminates the requirement for backer blocks when supported from an I-Joist header. The bottom flange location tabs, and an open top flange, provide enhanced capacity and improved ease ...
    • CE Marking
    View the product
  • Backer Free I-Joist Hanger with Adjustable Skew

    ITBS

    The ITBS solves the problem of skew hangers in I-joist to I-joist connections. It can be handed left or right on site by the carpenter, removing confusion when the floor is built opposite to the drawi...
    • CE Marking
    View the product
  • Top Flange I-Joist Hanger

    ITSE

    The ITSE hanger incorporates the ‘‘Strong Grip’’ which secures the I-joist without the need for any fasteners - where no uplift is required. Value-engineered for maximum performance. The offset sea...
    • CE Marking
    View the product
  • Metal Web Joist Hanger

    IUB

    The IUB hangers support metal web joists and solid timber joists without the need for plywood gussets. They incorporate the unique feature of bottom flanges, which provide enhanced capacity. Can be...
    • CE Marking
    View the product
  • Backer Free Metal Web Joist Hanger (with adjustable skew)

    IUBS

    The IUBS solves the problem of skewed hangers for metal web to metal web connections. It can be handed left or right on site, by the carpenter, removing confusion when the floor is built opposite to t...
    • CE Marking
    View the product
  • Face Fix Concealed Flange Hanger

    IUC

    The IUC is a face mounted concealed flange hanger for solid timber sections or engineered joists. These hangers cannot be skewed but will normally accomodate a skew of up to 5°. For concealed flange ...
    View the product
  • Engineered Joist to SIP Panel Hanger

    IUQ

    The IUQ and HIUQ is the first hanger range specifically designed to allow engineered joists to be face fixed to a Structural Insulated Panel (SIP), when used in conjunction with the CSA screws and Sim...
    • CE Marking
    View the product
  • Face Fix I-Joist Hanger

    IUSE

    The IUSE is a face fix hanger for supporting I-joists from timber members. This hanger incorporates the “Strong Grip™” which secures the I-joist without the need for any fasteners - where no uplift is...
    • CE Marking
    View the product
  • Joist End Support

    JES

    The JES is a two piece metal-work system which enables the use of engineered timber I-joists in loft conversions, offering a safe and economic alternative to the traditional method which requires stee...
    View the product
  • Joist Hanger with Adjustable Height Strap

    JHA

    JHA is a height adjustable joist hanger for supporting timber joists from timber members. Available in standard leg (JHA270) and long leg (JHA450) versions.
    • CE Marking
    View the product
  • Joist Hanger for Masonry

    JHM

    The JHM and JHMI range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
    • CE Marking
    View the product
  • Joist Hanger for Masonry: I-Joists

    JHMI

    The JHM and JHMI range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
    • CE Marking
    View the product
  • Reinforcing Angle

    L70

    A reinforcing angle designed to transfer loads between 2 ply floor joists/metal web joists. The L70 Reinforcing Angle may be used in pairs to transfer the loads between floor joist plys.
    View the product
  • Top flange hangers

    LBV

    LBV and B/BI are joist hangers for supporting I-joists and structural composite timber from timber members.   This design configuration has the material section where it counts, resulting in maxim...
    • CE Marking
    View the product
  • no_product_filter.error