Connectors for Masonry, Timber and Steel Construction
Loading ...
-
Timber Frame Panel Closer
TFPC
The timber panel closer helps minimise air leakage at the joint between closed panels and also prevents damage to the exterior substrate when using a screw alone.View the product -
Adjustable Truss Hanger
THA
The THA is a one-piece joist hanger supporting trussed rafters and composite timbers from timber members. The THA can be installed with a number of fixing options, for greater load capacity. See table... -
-
Heavy Duty Girder Truss Hanger
THGQ
The THGQ is a heavy duty girder truss hanger designed to support multiple ply girder trusses from a vertical member of a girder truss. Use with SDS screws instead of bolts - simplifying installatio... -
-
Truss Hanger Mono
THM
The THM (Truss Hanger Mono) is a joist hanger for supporting mono trusses from timber members. The THM hanger offers two installation options: Square twist nails only. Square twist nails and doubl... -
-
Concealed Beam Hanger
TU
The TU galvanised steel, load rated hanger provides an aesthetically attractive connection for exposed beams. Mild steel dowels and screws are included. TUBSL or TUBSR, factory bent, are suitable fo... -
-
Concealed Beam Hanger
TUS
These concealed hangers ensure a completely invisible assembly. The slot in the head facilitates on-site installation. TUBSL or TUBSR, factory bent, are suitable for skewed applications. -
-
Very Heavy Masonry Hanger
VHJHM
The VHJHM is a heavy duty masonry hanger intended for supporting timber joists, beams and trussed rafters from a padstone in a masonry wall. -
-
Loft Vent Plate
VP
The VP is part of the I-Loft system. The vent plate is a 1.2mm thick, 300mm long galvanised steel plate which provides a fast and cost effective solution to providing ventilation in the roof space. On...View the product -
Variable Pitch Connector
VPA
The VPA is an engineered one-piece connector for attaching I-joist rafters to wall plates. The VPA is adjustable to slopes between 15° and 45° with a special interlock design indicating when the ma... -
-
Valley Truss Clip
VTCR
The VTCR is designed to connect valley trusses to common trusses. Structural valley connection. Single sided for new construction or retro fit. Site adjustment for pitch. Adjustable between 10 an...View the product -
Window Board Tie
WBT
Attaches window boards to masonry wall. Material: Pre-galvanised mild steel. Item code WBT06 (150mm length).View the product -
Wall Starter Tie
WST
Screw in wall starter with nylon wall plug, WST provides lateral stability to brickwork or blockwork walls. Can be installed horizontally or at a 30° angle to the mortar joint.View the product -
Stainless Steel Cavity Wall Tie
WSTC
The WSTC is a screw-in cavity wall tie suitable for connecting a new leaf of masonry to an existing structure. Supplied with nylon wall plug and neoprene ‘O’ ring Suits cavities 50 to 125mm CE ma... -
-
Stainless Steel Wire Wall Tie
WTS
Types 2, 3 and 4 Stainless Steel Masonry to Masonry Wall Ties. WTS2: Type 2 Wall Ties: Masonry General Purpose Type 2 wall ties are suitable for general purpose applications such as domestic and smal...View the product -
Slotted Z-Clip
ZS
The ZS clip allows I-joists off-cuts or solid sawn timber to be used as noggings between joists to support floor decks or partitions. Fully interlocking top flange works on all I-joist header width... -
- no_product_filter.error
