Installation - Concealed Beam Hanger

ETB

Installation

Fasteners

To achieve stated loads, nails and screws used must comply with the ETA-04/0013.

 

 

Installation

Installation of ETB is simplified by the use of a jig.

The pocket installation can be routed by using a Ø16 mm cutter with Ø30 mm washer. 


CAUTION: ETB bracket should not be used for an assembly with a negative slope

  • insalled cross section. - Concealed Beam Hanger
    insalled cross section.
  • Countersunk within the supported member. - Concealed Beam Hanger
    Countersunk within the supported member.
  • Face fix installation. - Concealed Beam Hanger
    Face fix installation.
  • Face fix installation. - Concealed Beam Hanger
    Face fix installation.
  • Face fix installation. - Concealed Beam Hanger
    Face fix installation.
  • Face fix installation. - Concealed Beam Hanger
    Face fix installation.
  • Positive slope installation. - Concealed Beam Hanger
    Positive slope installation.
  • Skewed installation. - Concealed Beam Hanger
    Skewed installation.
  • Concealed Beam Hanger