Roof Connectors
Loading ...
-
Glide Shoe
GS
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates. The GS allows lateral movement of raised tie trusses up to 15mm during installation of roofin... -
-
Face Fix Girder Truss Hanger - Screw Installation
HGUQ
The HGUQ is a joist hanger for supporting mono trusses and girder trusses from timber members. It is compatible with SSH screws for even faster and easier installation.View the product -
Heavy Engineered Timber Hanger
HGUS
The HGUS joist hanger is designed to support trusses and girder trusses from timber members. -
-
Hip Ridge Connector
HRC
The HRC is a one-piece connector for supporting hip members from the ridge beam or rafters. It is site adjustable for slopes up to 45°, to cater for the hip pitch for both left and right rafters. -
-
Joist End Support
JES
The JES is a two piece metal-work system which enables the use of engineered timber I-joists in loft conversions, offering a safe and economic alternative to the traditional method which requires stee...View the product -
Light Slope & Skew Adjustable Hangers
LSSU
With these site adjustable hangers, you can always have the right hanger available for those special rush projects. This versatile range of products attaches joists/rafters to timber supports at any s... -
-
Nail Plate
NP
Nail plates are used to connect two or more timber members together. They are available in a variety of sizes. -
-
Ridge Rafter Connector
RR
The RR ridge rafter connector provides alignment control and correct nailing locations. The RR may be used with any rafter slope up to 30°. For back-to-back installations, the minimum width of the rid... -
-
Timber Joist Hanger Slope Adjustable
SPR
The SPR connector supports rafters from other timber members and can be sloped up or down by up to 45 degress. Slope angle can be adjusted on-site. Adjustable between 0 and 45 degree, up and down.... -
-
Truss Clip
TCP
The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint. TCP Truss Clips may be used for general purposes, strongback attachments as allpurpose ties wherev... -
-
Adjustable Truss Hanger
THA
The THA is a one-piece joist hanger supporting trussed rafters and composite timbers from timber members. The THA can be installed with a number of fixing options, for greater load capacity. See table... -
-
Heavy Duty Girder Truss Hanger
THGQ
THGQ is a heavy duty girder truss hanger designed to support multiple ply girder trusses from a vertical member of a girder truss. Use with SSH screws instead of bolts - simplifying installation. ... -
-
Truss Hanger Mono
THM
The THM (Truss Hanger Mono) is a joist hanger for supporting mono trusses from timber members. The THM hanger offers two installation options: Square twist nails only. Square twist nails and doubl... -
-
Loft Vent Plate
VP
The VP is part of the I-Loft system. The vent plate is a 1.2mm thick, 300mm long galvanised steel plate which provides a fast and cost effective solution to providing ventilation in the roof space. On...View the product -
Variable Pitch Connector
VPA
The VPA is an engineered one-piece connector for attaching I-joist rafters to wall plates. The VPA is adjustable to slopes between 15° and 45° with a special interlock design indicating when the ma... -
-
Valley Truss Clip
VTCR
The VTCR is designed to connect valley trusses to common trusses. Structural valley connection. Single sided for new construction or retro fit. Site adjustment for pitch. Adjustable between 10 an... -
- no_product_filter.error
