Timber to Timber I-Joist Hangers
Loading ...
-
Top Flange Heavy Welded Hanger
GLTV
GLTV is for supporting I-joists and structural composite timber from timber members. These hangers offer design flexibility and versatility. GLTV hangers are designed for use with structural compo...View the product -
I-Joist Top Flange Hanger
HB
HB is a joist hanger for supporting I-joists and structural composite timber from timber members. The HB is designed especially for use with single ply headers of thicknesses 89mm or more.View the product -
Face Fix Girder Truss Hanger
HGUS
The HGUS is a joist hanger for supporting mono trusses and girder trusses from timber members. Double shear nailing allows distribution of the carried members load through two points on each nail for ... -
-
Heavy Backer Free I-Joist Hanger
HITB
The ITB/HITB hangers eliminates the requirement for backer blocks when supported from an I-joist header. The bottom flange location tabs and an open top flange provide enhanced capacity and improved e... -
-
Heavy Metal-Web Hanger
HIUB
The HIUB hangers support metal web joists and solid timber joists without the need for plywood gussets. Can be used on metal web joists or solid joist headers. Eliminates the need for plywood gus... -
-
Metal Web Joist to SIP Hanger
HIUQ
The IUQ and HIUQ is the first hanger range specifically designed to allow engineered joists to be face fixed to a structural insulated panel (SIP), when used in conjunction with the Simpson Strong-Tie...View the product -
I-Beam Hole Support
IHS
The IHS is designed to strengthen I-joists when holes are required to be cut in locations not normally permitted. Allows holes to be cut 50mm from bearing point, which allows services to run close ...View the product -
Backer Free I-Joist Hanger
ITB
The ITB/HITB hangers eliminates the requirement for backer blocks when supported from an I-joist header. The bottom flange location tabs and an open top flange provide enhanced capacity and improved e... -
-
Backer Free I-Joist Hanger With Adjustable Skew
ITBS
The revolutionary ITBS reduces build cost, confusion, speed of installation and stock holding. The ITBS solves the problem of skew hangers in timber to timber connections. It can be handed left or rig... -
-
Top Flange I-Joist Hanger
ITSE
The ITSE top fix hanger supports I-joists from timber members. The ITSE hanger incorporates the “Strong Grip™” which secures the I-Joist without the need for any fasteners - where no uplift is require... -
-
Face Fix Metal-Web Hanger
IUB
The IUB/HIUB hangers support metal web joists and solid timber joists without the need for plywood gussets. They incorporate the unique feature of bottom flanges, which provide enhanced capacity. ... -
-
Metal-Web Joist With Adjustable Skew
IUBS
The IUBS solves the problem of skew hangers in timber to timber connections. It can be handed left or right on site by the carpenter, removing confusion when the floor is built opposite to the drawing... -
-
Metal Web Joist to SIP Hanger
IUQ
The IUQ and HIUQ is the first hanger range specifically designed to allow engineered joists to be face fixed to a structural insulated panel (SIP), when used in conjunction with the Simpson Strong-Tie... -
-
Face Fix I-Joist Hanger
IUSE
IUSE hangers guarantee easy installation thanks to the top flanges, while maintaining the bottom chord by strong grip. Nailing is done on the lateral flanges after pre-positioning the connectors with ... -
-
Top flange hangers
LBV
LBV and B/BI are joist hangers for supporting I-joists and structural composite timber from timber members. This design configuration has the material section where it counts, resulting in maxim... -
-
Face Fix, Backer Free I-joist & Metal Web Joist Hanger
LIB
The LIB is a face fix hanger for connecting joists to I-Joist headers without the need for backer blocks. Bend over the bottom tabs to provide increased performance. Backer free installation save... -
-
Top Fix, I-Joist & Metal Web Joist Hanger
LITB
The LITB is a top fix hanger for connecting I-Joists to I-Joist or Metal Web Joists to Metal Web Joists. -
-
Multiple Joist Connector
MJC
The multi joist connector (MJC) allows two I-joists or two metal web joists to be fixed together to act as a single unit, transferring the incoming load from the loaded ply to the unloaded ply. The MJ... -
-
Adjustable Strap Joist Hanger
THAI
THAI is a one piece joist hanger for supporting composite timbers from timber members. The model number and size is stamped onto the seat of most sizes for easy identification of the hanger, even aft... -
-
Slotted Z-Clip
ZS
The ZS clip allows I-joists or solid sawn timber to be used as noggings between joists to support floor decks or partitions. Fully interlocking top flange works on all I-joist header widths to prev... -
- no_product_filter.error
