Timber to Timber Solid Joist Hangers

Product lines

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

group.catalogs.label

  •  
  •  
  •  
  •  
  •  
  •  

Selections

  •  
  •  
  •  

Environment

  •  
  •  

Certifications

  •  
Loading ...
  • Skewed 45° Hanger (right and left)

    ET

    The ET is used for supporting skewed timber joists from timber members. This range is tested and standardised with a 45° skew angle left or right.
    • CE Marking
    View the product
  • Face Fix Concealed Flange Hanger

    IUC

    The IUC is a face mounted concealed flange hanger for solid timber sections or engineered joists. These hangers cannot be skewed but will normally accomodate a skew of up to 5°. For concealed flange ...
    View the product
  • Joist Hanger with Adjustable Height Strap

    JHA

    JHA is a height adjustable joist hanger for supporting timber joists from timber members. Available in standard leg (JHA270) and long leg (JHA450) versions.
    • CE Marking
    View the product
  • Light Speed Prong Joist Hanger

    LUP

    LUP is a light duty joist hanger for supporting timber joists from timber members. Precision formed and engineered for fast installation and maximum loads. Speed prongs are curved steel for extra ...
    • CE Marking
    View the product
  • Mini Joist Hanger

    MH

    The MH is a one piece galvanised hanger available in a range of widths for light duty applications such as trimmers and ceiling joists of rectangular section. THe MH can also be used to build decking ...
    • CE Marking
    View the product
  • Mini Hanger

    MHA

    The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL. Ideally suited for small timber sections and timber members; such as trimmers ...
    View the product
  • Heavy Duty Face Fix Hangers

    SAE-SAEL

    SAE and SAI ranges are heavy-duty hangers designed for applications requiring additional strength. SAE hangers are nailed using square twist nails but have bolt holes for 12mm fasteners into the face...
    • CE Marking
    View the product
  • Internal Flange Face Fix Hanger

    SAI-SAIL

    The SAE and SAI ranges are heavy-duty hangers designed for timber to timber applications requiring additional strength. • The hanger depth is to be at least 60% of the carried member depth to preven...
    • CE Marking
    View the product
  • Width Adjustable Face Fix Joist Hanger

    SDE

    The SDE is a two piece, width adjustable face fix hanger. The two separate components that make up the SDE system can be adjusted to suit a range of joist widths between 60mm to 160mm. Each SDE is sup...
    • CE Marking
    View the product
  • Adjustable Truss Hanger

    THA

    The THA is a one-piece joist hanger supporting trussed rafters and composite timbers from timber members. The THA can be installed with a number of fixing options, for greater load capacity. See table...
    • CE Marking
    View the product
  • no_product_filter.error