Installation - High Performance Resin

AT-HP SST

Installation

Curing Schedule

Mortar temperature

Tmortar

[°C)

Base material temperature

Tbase material

[°C]

Gel time (working time) in dry/wet concrete

tgel

[min]

Curing time in dry/wet concrete

tcure

[h; min]

+5°C -5°C to -1°C 15min 9h
+5°C 0°C to 4°C 12min 4h
+5°C 5°C to 9°C 9min 1,5h
+10°C 10°C to 19°C 4min 60min
+20°C 20°C to 29°C 1min 30min
+30°C 30°C and above <1min 20min

Concerning the version of the mortar with changing color proof, after the minimum curing time the blue colored injection mortar changed into grey. The curing color proof is available for standard version of the mortar only and the curing color proof is working above 5°C.

 

Drilling methods
Solid brick/concrete Percussion/hammer drilling
Hollow/perforated brick Rotation drilling
Aerated concrete Percussion/hammer drilling
  • Drill. - High Performance Resin
    Drill.
  • Brush. - High Performance Resin
    Brush.
  • Insert sieve. - High Performance Resin
    Insert sieve.
  • Inject the resin. - High Performance Resin
    Inject the resin.
  • Insert the rod, turning slowly. - High Performance Resin
    Insert the rod, turning slowly.
  • Once set, full load capacity is reached. - High Performance Resin
    Once set, full load capacity is reached.
  • Drill. - High Performance Resin
    Drill.
  • Remove dust by brushing and blowing, - High Performance Resin
    Remove dust by brushing and blowing,
  • Fill the hole to half or two thirds, Withdrawing the nozzles with each pump. - High Performance Resin
    Fill the hole to half or two thirds, Withdrawing the nozzles with each pump.
  • Insert the rod, turning slowly. - High Performance Resin
    Insert the rod, turning slowly.
  • Once set, full load capacity is reached. - High Performance Resin
    Once set, full load capacity is reached.

Installation parameters - Concrete

Installation parameters - Concrete - AT-HP SST - High Performance Resin
References Ø drilling diameter [d0] [mm] Maximum diameter of hole in the fixture [df] [mm] Depth of the drilling hole [h0=hef=8d] [mm] Depth of the drilling hole [h0=hef=12d] [mm] Wrench Size [SW] Installation Torque [Tinst] [Nm] Characteristic spacing (4) [scr,N] [mm] Minimum spacing [smin] Characteristic edge distance (4) [ccr,N] [mm] Minimum edge distance [cmin] [mm] Min member thickness - hef=8d [hmin] [mm]
AT-HP + LMAS M8* 10 9 64 96 13 10 175 40 88 40 100
AT-HP + LMAS M10* 12 12 80 120 17 20 213 50 106 50 110
AT-HP + LMAS M12* 14 14 96 144 19 40 255 60 128 60 126
AT-HP + LMAS M16* 18 18 128 192 24 80 330 80 165 80 164
AT-HP + LMAS M20* 22 22 160 240 30 150 400 100 200 100 204
AT-HP + LMAS M24* 28 26 192 288 36 200 447 120 223 120 248
AT-HP + LMAS M27* 30 30 216 324 41 270 503 135 251 135 276
AT-HP + fer Ø8 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmin - - - - - - - - - - -
AT-HP + LMAS M30* 35 33 240 360 46 300 537 150 268 150 310
AT-HP + fer Ø8 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmax - - - - - - - - - - -

Installation parameters - Autoclaved araeted concrete blocks

Installation parameters - Autoclaved araeted concrete blocks - AT-HP SST - High Performance Resin
References Ø drilling diameter [d0] [mm] Maximum diameter of hole in the fixture [df] [mm] Depth of the drilling hole [h1] [mm] Wrench Size [SW] Installation Torque [Tinst] [Nm] Depth of the drilling hole [hef] [mm] Characteristic spacing (4) - Scr,N [mm] Minimum spacing - Smin [mm] Characteristic edge distance (4) - Ccr,N [mm] Minimum edge distance - Cmin [mm]
AT-HP + LMAS M8* 10 9 85 13 4 80 160 50 80 50
AT-HP + LMAS M10* 12 12 85 15 6 80 200 50 100 50
AT-HP + LMAS M12* 14 14 85 18 8 80 240 50 120 50
AT-HP + LMAS M16* - - - - - - - - - -
AT-HP + LMAS M20* - - - - - - - - - -
AT-HP + LMAS M24* - - - - - - - - - -
AT-HP + LMAS M27* - - - - - - - - - -
AT-HP + fer Ø8 x lbdmin - - - - - - - - - -
AT-HP + fer Ø10 x lbdmax - - - - - - - - - -
AT-HP + fer Ø14 x lbdmin - - - - - - - - - -
AT-HP + LMAS M30* - - - - - - - - - -
AT-HP + fer Ø8 x lbdmax - - - - - - - - - -
AT-HP + fer Ø12 x lbdmin - - - - - - - - - -
AT-HP + fer Ø14 x lbdmax - - - - - - - - - -
AT-HP + fer Ø10 x lbdmin - - - - - - - - - -
AT-HP + fer Ø12 x lbdmax - - - - - - - - - -
AT-HP + fer Ø16 x lbdmin - - - - - - - - - -
AT-HP + fer Ø16 x lbdmax - - - - - - - - - -
AT-HP + fer Ø20 x lbdmin - - - - - - - - - -
AT-HP + fer Ø20 x lbdmax - - - - - - - - - -
AT-HP + fer Ø25 x lbdmin - - - - - - - - - -
AT-HP + fer Ø25 x lbdmax - - - - - - - - - -
AT-HP + fer Ø28 x lbdmin - - - - - - - - - -
AT-HP + fer Ø28 x lbdmax - - - - - - - - - -
AT-HP + fer Ø32 x lbdmin - - - - - - - - - -
AT-HP + fer Ø32 x lbdmax - - - - - - - - - -

Installation parameters - Solid brick

Installation parameters - Solid brick - AT-HP SST - High Performance Resin
References Ø drilling diameter [d0] [mm] Maximum diameter of hole in the fixture [df] [mm] Depth of the drilling hole [h1] [mm] Wrench Size [SW] Installation Torque [Tinst] [Nm] Depth of the drilling hole [hef] [mm] Characteristic spacing (4) - Scr,N [mm] Minimum spacing - Smin [mm] Characteristic edge distance (4) - Ccr,N [mm] Minimum edge distance - Cmin [mm]
AT-HP + LMAS M8* 10 9 85 13 4 80 160 50 80 50
AT-HP + LMAS M10* 12 12 85 15 6 80 200 50 100 50
AT-HP + LMAS M12* 14 14 85 18 8 80 240 50 120 50
AT-HP + LMAS M16* - - - - - - - - - -
AT-HP + LMAS M20* - - - - - - - - - -
AT-HP + LMAS M24* - - - - - - - - - -
AT-HP + LMAS M27* - - - - - - - - - -
AT-HP + fer Ø8 x lbdmin - - - - - - - - - -
AT-HP + fer Ø10 x lbdmax - - - - - - - - - -
AT-HP + fer Ø14 x lbdmin - - - - - - - - - -
AT-HP + LMAS M30* - - - - - - - - - -
AT-HP + fer Ø8 x lbdmax - - - - - - - - - -
AT-HP + fer Ø12 x lbdmin - - - - - - - - - -
AT-HP + fer Ø14 x lbdmax - - - - - - - - - -
AT-HP + fer Ø10 x lbdmin - - - - - - - - - -
AT-HP + fer Ø12 x lbdmax - - - - - - - - - -
AT-HP + fer Ø16 x lbdmin - - - - - - - - - -
AT-HP + fer Ø16 x lbdmax - - - - - - - - - -
AT-HP + fer Ø20 x lbdmin - - - - - - - - - -
AT-HP + fer Ø20 x lbdmax - - - - - - - - - -
AT-HP + fer Ø25 x lbdmin - - - - - - - - - -
AT-HP + fer Ø25 x lbdmax - - - - - - - - - -
AT-HP + fer Ø28 x lbdmin - - - - - - - - - -
AT-HP + fer Ø28 x lbdmax - - - - - - - - - -
AT-HP + fer Ø32 x lbdmin - - - - - - - - - -
AT-HP + fer Ø32 x lbdmax - - - - - - - - - -

Installation parameters - Hollow brick

Installation parameters - Hollow brick - AT-HP SST - High Performance Resin
References Ø drilling diameter [d0] [mm] Size of the Sieve [ds x ls] [mm] Maximum diameter of hole in the fixture [df] [mm] Depth of the drilling hole [h1] [mm] Wrench Size [SW] Installation Torque [Tinst] [Nm] Depth of the drilling hole [hef] [mm] Characteristic spacing (4) - Scr,N [mm] Minimum spacing - Smin [mm] Characteristic edge distance (4) - Ccr,N [mm] Minimum edge distance - Cmin [mm]
AT-HP + LMAS M8* 16 16 x 85 & 16 x 130 9 135 13 4 130 500 100 250 100
AT-HP + LMAS M10* 16 16 x 85 & 16 x 130 12 135 15 6 130 500 100 250 100
AT-HP + LMAS M12* 16 16 x 85 & 16 x 130 14 135 18 8 130 500 100 250 100
AT-HP + LMAS M16* - - - - - - - - - - -
AT-HP + LMAS M20* - - - - - - - - - - -
AT-HP + LMAS M24* - - - - - - - - - - -
AT-HP + LMAS M27* - - - - - - - - - - -
AT-HP + fer Ø8 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmin - - - - - - - - - - -
AT-HP + LMAS M30* - - - - - - - - - - -
AT-HP + fer Ø8 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmax - - - - - - - - - - -

Installation parameters - Hollow blocks

Installation parameters - Hollow blocks - AT-HP SST - High Performance Resin
References Ø drilling diameter [d0] [mm] Size of the Sieve [ds x ls] [mm] Maximum diameter of hole in the fixture [df] [mm] Depth of the drilling hole [h1] [mm] Wrench Size [Sw] Installation Torque [Tinst] [Nm] Depth of the drilling hole [hef] [mm] Characteristic spacing (4) - Scr,N [mm] Minimum spacing - Smin [mm] Characteristic edge distance (4) - Ccr,N [mm] Minimum edge distance - Cmin [mm]
AT-HP + LMAS M8* 16 16 x 130 9 135 13 4 130 500 100 250 100
AT-HP + LMAS M10* 16 16 x 130 12 135 15 6 130 500 100 250 100
AT-HP + LMAS M12* 16 16 x 130 14 135 18 8 130 500 100 250 100
AT-HP + LMAS M16* - - - - - - - - - - -
AT-HP + LMAS M20* - - - - - - - - - - -
AT-HP + LMAS M24* - - - - - - - - - - -
AT-HP + LMAS M27* - - - - - - - - - - -
AT-HP + fer Ø8 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmin - - - - - - - - - - -
AT-HP + LMAS M30* - - - - - - - - - - -
AT-HP + fer Ø8 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø14 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø10 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø12 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø16 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø20 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø25 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø28 x lbdmax - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmin - - - - - - - - - - -
AT-HP + fer Ø32 x lbdmax - - - - - - - - - - -

..