Installation - Skewed 45° Hanger (right and left)
ET
Installation
Fasteners on header
Wood substrate:
- CNA annular ring-shank nails dia. 4.0 x 35 mm
Steel substrate:
- Bolts dia. 12 mm (bolt diameter cannot be more than 2 mm smaller than the drill hole diameter)
Concrete substrate:
- Mechanical anchor (dia. 12 mm: WA M10-78/5)
- Chemical anchor (dia. 12 mm: LMAS M10-110) with AT-HP resin
Installation
Use all specified fasteners. See General Notes.
Verify that the header can take the required fasteners specified in the table.
Multi-ply joists must be connected together so that they act as one single element.
-
ET248 -
ET248 -
ET260 - Timber Installation -
ET260 - Masonry Installation -
ET260 - Plan View -
ET301 - Timber Installation -
ET301 - Masonry Installation -
ET301 - Plan View -
-
-