Installation - Timber Joist Hanger Slope Adjustable

SPR

Installation

Fasteners

On supported member:

  • CNA annular ring-shank nails dia. 4.0 x 35 mm or CNA dia. 4.0 x 50 mm.
  • Square twist nails N3,75x30

On supporting member:
Wood substrate:

  • CNA annular ring-shank nails dia. 4.0 x 35 or CNA dia. 4.0 x 50 mm.
  • Lag screws and bolts dia. 10 mm.
  • Square twist nails N3,75x30

Concrete substrate:

  • Mechanical anchor: WA M10-78/5 .
  • Chemical anchor threaded rod dia. 10 mm: LMAS M10-130 with AT-HP resin.

Metal substrate:

Bolts dia. 10 mm.

Installation
  • Use all specified fasteners.
  • Bend only once.
  • To ensure proper seat installation, install the bottom nails prior to the side nails.
  • Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the carried members.
  • Typical Installation - Timber Joist Hanger Slope Adjustable
    Typical Installation
  • Timber Joist Hanger Slope Adjustable