Technical Data Sheets
Quick access to the technical data of our products.
Technical Data Sheets
| Image | Code / Name | Description | Technical Data Sheets (PDF) | Link to Product |
|---|---|---|---|---|
| SDE Width Adjustable Face Fix Joist Hanger - SDE |
The SDE is a two piece, width adjustable face fix hanger. The two separate components that make up the SDE system… | |||
| SDW Structural Wood Screw - SDW |
The Strong-Drive® SDW screw is a 8.0mm diameter, high-strength structural wood screw specifically designed for… | |||
| SES Simpson End Seal - SES |
Simpson End Seal: One solution for air leakage and sound transference requirements.The SES Simpson End Seal provides a… | |||
| SFH Safety Fast Masonry Restraint Hanger - SFH |
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry… | |||
| SFHI Safety Fast Masonry Restraint Hanger For I-Joist - SFHI |
The Safety Fast Hangers are designed to support timber joists, beams and trussed rafters from masonry walls without the… | |||
| SFLH Safety Fast Lite Hanger - Solid Joists - SFLH |
The SFLH is an innovative single piece hanger designed to support timber joists from masonry walls, without the… | |||
| SFLHI Safety Fast Lite Hanger - SFLHI |
The SFLHI is an innovative single piece hanger designed to support timber joists from masonry walls without the need… | |||
| SFWH Safety Fast (Welded) Hanger for Solid Joists - SFWH |
The SFWH Safety Fast Hangers are designed to support timber joists, beams and trussed rafters from masonry walls… | |||
| SFWHI Safety Fast (Welded) Masonry Restraint Hanger for I-Joists - SFWHI |
The Safety Fast Hangers are designed to support timber joists, beams and trussed rafters from masonry walls without the… | |||
| SJC Steel-Joist Connectors - SJC |
SJC connectors have been specifically designed for various CFS joist and rafter applications.The unique clip… | |||
| SNRK Solid Joist Notch Reinforcement Kit - SNRK |
Reinforces solid timber joists where they have been notched to allow electrical and water services to pass through them… | |||
| SPA Sole Plate Anchor - SPA |
The SPA is a versatile bracket used to attach timber sole plates to concrete foundations. | |||
| SPF Purlin Anchor - SPF |
The SPF can be used to connect two timbers that cross over at 90 degrees to each other and can be used with a number of… | |||
| SPKC Grooved Nail - Laquered - SPKC |
Nail with low oval head and grooved shank for use indoors to fix pre-painted fine joinery to timber, such as when… | |||
| SPKEZ Grooved Nail - Electro Galvanised - SPKEZ |
This nail with its flat head and grooved shank is used indoors and in dry environments for nailing timber structures,… | |||
| SPR Timber Joist Hanger Slope Adjustable - SPR |
The SPR connector supports rafters from other timber members and can be sloped up or down by up to 45 degress.Slope… | |||
| SPWG Square Plate Washer - SPWG |
The SPWG adds strength to a bolted connection in timber.2.5mm thick 50x50mm square plate washer with an M12 bolt hole. | |||
| SPWT Stepped Party Wall Tie - SPWT |
The SPWT has been specifically designed and engineered to connect separating walls of attached timber framed… | |||
| SSB Bypass Framing Movement Clip Strut Connector - SSB |
The SSB framing movement clip is a versatile strut connector commonly used at the bottom of a steel beam to … | |||
| SSBFHSD Bi-Metal Timber to Steel Screw - SSBFHSD |
The SSBFHSD screw is a bi-metal screw designed for timber to steel applications (1.2-2.4mm steel thickness). The bi-… | |||
| SSDHSD SSDHSD HARDWOOD-DECKING Screw - SSDHSD |
SSDHSD is a stainless steel screw with a ribbed head and drill point tip suitable for hardwood decking installation. | |||
| SSDTH SSDTH WOOD CLADDING and DECKING Screw - SSDTH |
SSDTH is a stainless steel screw with a trim head and sharp point tip suitable for wood cladding & decking… | |||
| SSH Hexagon Head Connector Screw Impreg®+ - SSH |
SSH is used together with connectors where high load capability is required. The conical shape under the head ensures… | |||
| SSP Steel Strong-Portal for Timber Frame Racking Resistance - SSP |
Developed to offer enhanced racking resistance in timber structures, Steel Strong-Portal is available in a range of… | |||
| SSW Steel Strong-Wall for Timber Frame Racking Resistance. - SSW |
The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete… | |||
| SSWSCB SSWSCB TILE ROOFING Screw, Coarse Thread - SSWSCB |
SSWSCB is a stainless steel screw with a bugle head, coarse thread and a type 17 point. It is ideally suited to… | |||
| STC Truss Clip - STC |
STC truss clip is used to provide alignment control between a roof truss and non-bearing walls. They are… | |||
| SVM Stainless Steel Soffit Vent Mesh - SVM |
A 75mm wide, fine stainless steel mesh on a 30m roll. Easy to cut and install. Allows roof space ventilation and helps… | |||
| SWC Structural Countersunk Wood Screw - SWC |
SWC is a countersunk structural screw designed for load-bearing wood structures. The SWC screw has a milling thread to… | |||
| SWD Structural Double Threaded Wood Screw - SWD |
SWD is a construction screw designed to connect two timber members together. The small cap-style head and double… | |||
| SWT Brick to SIP Tie - SWT |
The SWT wall ties are used to restrain external brickwork back to SIP (Structural Insulated Panels).The SWT offers… | |||
| SWW SWW Structural Washer Head Wood Screw - SWW |
SWW is a washer head structural screw designed for load-bearing wood structures. The SWW screw has a milling thread to… | |||
| TAP Rimmed Hammerset Anchor - TAP |
Hammerset anchor with metric internal thread M6 - M16 for medium load range for anchoring in non-cracked concrete C20/… | |||
| TBG Truck Bed Screw - TBG |
The TBG heavy duty truck bed screw is perfect for fixing timber to steel frames. It has a countersunk ribbed flat head… | |||
| TCB Thin Coat Angle Bead - TCB |
Thin Coat Bead (25mm wing, 3mm plaster depth)Designed for use with one coat plaster work down to a 3mm finish.… | |||
| TCHI Top Chord Hung I-Joist Hanger - TCHI |
The TCHI is a hanger designed to support a modified I-joist end (Top Chord Hung detail), which aids the design,… | |||
| TCP Truss Clip - TCP |
The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.TCP Truss Clips… | |||
| TFLS Timber Frame Levelling System - TFLS |
TFLS provides the combined function of levelling and fixing the sole plate to the foundation or substructure. It… | |||
| TFPC Timber Frame Panel Closer - TFPC |
The TFPC timber frame panel closer is used to draw timber panels together. It helps minimise air leakage at the joint… | |||
| THA Adjustable Truss Hanger - THA |
The THA is a one-piece joist hanger supporting trussed rafters and composite timbers from timber members. The THA can… |
