• Steel - grey phosphate coating
• Steel - yellow zinc coating

• 25mm and 32mm lengths CE marked to EN14592
• Deep recessed square drive holds bits tight, reducing cam-outs
• High-low thread for easy driving and holding underlayment tight
• Specially-designed sharp point for fast starts
• Trim-head with nibs for easy countersinking
• Plywood or OSB to wood applications
• Recommended for installing Fermacell board to steel up to 0.9mm thickness
• Bit (BIT2SE) included in every box for 25mm and 32mm screws
• Bit (BITL2SE) included in every box for 19mm screws

New MTHZ19E 19mm collated flooring screw. 

Using fasteners longer than necessary can lead to screws protruding through the underside of floorboards. This has the potential to cause all sorts of problems including damaging water pipes, cables and underfloor heating. The 19mm flooring screw is a safer way to fix 6mm plywood whilst providing superior holding power that only a screw can provide, and eliminating floor squeaks, floor lift and withdrawal that can occur when using nails. With 50 screws per strip there is less time reloading and significantly reducing installation times. The collation design means that there are no missed screws and no waste.

This screw has a different collation to the other MTH screws and so requires a different Quik Drive attachment - QDBPC19EF