SDE

Width Adjustable Face Fix Joist Hanger

The SDE is a two piece, width adjustable face fix hanger. The two separate components that make up the SDE system can be adjusted to suit a range of joist widths between 60mm to 160mm.
Each SDE is supplied as a pair. Optional bolt holes (13mm diameter).

CE Marking
ETA
Service class 2
Electrogalvanized steel 20 µm

Product Details

Images

Installation Timber to timber

Features

Material

  • Galvanised steel S250GD + Z275 according to NF EN 10346.

Avantages

  • Great flexibility in use in new and refurbished condition.

Application

Support

  • Supporting member: wood, concrete, steel
  • Supported member: solid wood, composite lumber

Intend Use

  • Joists
  • Refurbishment of existing assemblies

Technical Data

Dimensions

Product Dimensions

References Joist Size [mm] Product Dimensions [mm] Header holes Joist holes
Width Height A B C D F t Ø5 Ø13 Ø5
Min Max. Min Max.
SDE300/3060250120177601188441.586218410
SDE340/3060250140207601388441.586222412
SDE380/3060250160237601588441.586222412
SDE440/3060250190282601888441.586228415

Product Capacities - Timber to Timber - Full nailing Br36

References Characteristic capacities - Timber to timber - Full nailing
Number of Fasteners Product characteristic capacities - Timber C24 [kN] Safe Working Loads [kN]
Header Joist R1.k  R2.k R1.SWL.Long Term R2.SWL.Short Term
Qty Type Qty Type N3.75x30 Ø4,0x100 N3.75x30 Ø4,0x100 N3.75x30 Ø4,0x100 N3.75x30 Ø4,0x100
SDE300/3018N3,75x30 or N4,0x100*10N 3,75x3039.64.59.61.342.34.8
SDE340/3022N3,75x30 or N4,0x100*12N 3,75x303.911.56.311.51.64.83.25.8
SDE380/3022N3,75x30 or N4,0x100*12N 3,75x3011.511.56.311.54.84.83.25.8
SDE440/3028N3,75x30 or N4,0x100*14N 3,75x3014.314.39.414.3664.77.2

*Characteristic Capacity varies depending on the type of header fastener used (N3.75x30 Square twist nail, or N4.0x100 Round Wire Nail)

Installation

Installation

Fasteners

On wood:

  • CNA annular ring-shank nails dia. 4.0 x 50 mm
  • Lag screws and bolts dia. 10 or dia. 12 mm

On concrete:
Concrete substrate:

  • Mechanical anchor: WA M12-104/5 pin
  • Chemical anchor: AT-HP resin + LMAS M12-150/35 threaded rod

Hollow masonry substrate: (check the load bearing capacity of the anchors)

  • Chemical anchor: AT-HP or POLY-GP resin + LMAS M12-150/35 + SH M16-130 screen

Installation

  • Use all fasteners as specified in the table below.
  • Check that the header can accomodate the fasteners specified.
  • Each SDE piece must also be nailed through the holes underneath the joist.

 

Certification

European Technical Assessment (ETA)

Contact

Simpson Strong-Tie U.K.

Simpson Strong-Tie

Cardinal Point, Winchester Road
Tamworth
Staffordshire
B78 3HG
United Kingdom